Kemper Champion 300 serie

The headers of the 300 Series operate in an open cut mode. Fast and uncompromising. Up to 10 cutting rotor blades enable operation regardless of the distance between rows and over a wide range of crops. The row independent cutting technology makes it possible to operate in the field from any direction - particularly important when harvesting laid crops.

Row independent cutting system.

Row independent cutting system with high speed cutting rotors and freewheel mechanism. Cuts across the entire cutting width by means of enclosed saw type rotor blades with replaceable segments.
Fast rotating cutting rotors can also cut under heavy, difficult circumstances, for example, in weeds or whole crop silage.
Tungsten carbide coated saw type blades, manufactured with quality certification, self sharpening, lower load placed on clutches and transmissions. Available as service set.
The 300 Series features special shaped cleaners. The sharp edged maize stubble is broken up by the cleaners placed under the cutting rotors. This not only protects the tyres of the forage harvester, but also speeds up the decomposition of the stubble.

Cropflow.

Even crop intake, lengthwise to the main chopping unit and clean gathering with the two angled, step type intake drums across the entire channel width, ensures maximum use of the harvester's engine power.
This delivers maximum productivity while producing optimum chop quality.

The solution for extreme harvesting conditions.

Drum covers with greater surface area on the feed rotors improve crop transport to the chopper intake area under difficult harvesting conditions. Specially shaped ear bars minimise loss of crop when working on sloping terrain. Bolt-on scrapers, usable on both sides, scrape out crop debris. To facilitate crop transport, two innovative spiral intakes guide the crop efficiently to the main chopping unit, even under difficult operating conditions.

All 300 Series intake rotors are fitted with bolt-on scrapers for attachment to either side for efficient removal of crop debris, even under extreme operating conditions.

Anvendelsesmuligheder.

Wide range of applications: Maize, sorghum, sunflowers, whole crop silage, oilseed rape, hemp, pampas grass, etc.

Transport.

The machines 345, 360, 375 are folded hydraulically to a transport width of 3.00 m.
The transport guard is fitted with flashing lights and position lights. When folded, the cutting units may partially cover the headlamps on some self propelled forage harvesters.
375 – Transport width 3.0 m, hydraulic dual fold-in mechanism, perfect visibility for the driver.

Kemper 345:
Transport width
2,98 m

Kemper 360:
Transport width
2,98 m

Kemper 375:
Transport width
2,98 m

Optional equipment

Standard 375 not possible for 330 Mechanical lateral tilt for optimum adaptation to ground surface and for even stubble length when working on sloping terrain. Ground unevenness is compensated and is not transmitted from the harvester to the implement. Independent of harvester and harvester main unit. Available as a field installed kit.
New: With adjustable pull springs! New: Electro hydraulic lateral tilt (only for Claas) for optimum adaptation to ground surface:
  • Floating by hydraulic cylinder

  • Active floating controlled by sensors

  • Even harvesting at increased stubble height within the sensors range

    • Minimises contamination (sand)

    • Lower wear costs (Minimum soil contact)

Maize stalks are lifted when crop is heavily laid.

Whole crop silage.
Short tips for improved crop transport.

2 - speed transmission for optimised intake speed - especially with longer chopping lengths.

Mechanical row guidance – an additional driver aid.

Liquid cooled friction clutch: The KEMPER solution for optimal power transmission prevents overheating, provides longer service life than standard type clutches - available as a field installed kit.
Standard 375

Technical specifications

Type 330 345 360 375
Length: 2.06 m 2.06 m 2.06 m 2.06 m
Width: 3.00 m

4.55 m

6.05 m

7.55 m
Height folded: 1.36 m 1.50 m 2.26 m 2.30 m
Working width: 3.00 m 4.50 m 6.00 m 7.50 m
Transport width: 3.00 m 3.00 m 3.00 m 3.00 m
Weight of basic mach. approx.: 1500 kg 2100 kg 2680 kg 3259 kg

Suitable attachments

Type/Brand Case IH
330 6900, 7400, 7800
CHX 320, 420, 520, 620
345 6900, 7400, 7800
CHX 320, 420, 520, 620
360 CHX 320, 420, 520, 620
375 CHX 620 NEW

Type/Brand  Claas
330 685, 685 SL, 690, 690 SL, 695, 695 SL, 695 MEGA
820, 840, 860, 880
830, 850, 870, 890, 900
345 820, 840, 860, 880
830, 850, 870, 890, 900
360 840
830, 850, 870, 890, 900
375 890, 900,
890 and 890 Speedstar
regard local requirements

Typ / Marke Krone
330 -
345 -
360 -
375 375 KR V8, V12 NEW

Type/Brand Massey Ferguson
330 5130, 5150, 5170
345 5130, 5150, 5170
360 -
375 -

Type/Brand Mengele
330 5200, 5500, 5600, 5800, 6000, 6500, 6600, 6800, 7000
Mammut, 6300, 6800, 7300, 7800
345 5200, 5500, 5600, 5800, 6000, 6500, 6600, 6800, 7000
Mammut, 6300, 6800, 7300, 7800
360 -
375 -

Type/Brand  New Holland
330 FX 300, 375, 450, FX 28, 38, 48, 58
FX 30, 40, 50, 60
345 FX 300, 375, 450, FX 28, 38, 48, 58
FX 30, 40, 50, 60
360 FX 450, FX 48, 58
FX 50, 60
375 FX 60 NEW

Get a prospect